Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

tie rod 700

this is more of a theoretical question. i can't get my tie rod end off. I sprayed it with Kroil already for a couple of days and it's still not budging. So next resource would be using a torch.
My question - do i destroy the tie rod (other side connecting to the steering rack)? I don't want to get this one loos only because i heat it up.
thanks!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    tie rod 700

    Penetrating oil won't work, like on threads, because they're a tight fit with no spaces. One method is to whack it from both sides with a pair of big hammers.
    --
    1992 745, >500k km








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    tie rod 700

    I've had good luck heating and then melting paraffin wax into threads, let it cool. Repeat. You don't have to heat it so hot that it'll destroy things.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.