Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replaced motor mounts. Now losing power steering fluid, driver side. 200 1993

posted by  james_a_sousa on  Sat Sep 27 18:20 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

Check those fittings carefully - on the 740, the threads are extra fine - replacements are not available for the fittings.

Also note that the rack metal is softer than the fittings - a prelude to disaster - very easy to damage the threads in the rack.

I recommend that you buy two preformed tubes from Volvo or some other OEM supplier.

On my 740, I purchased a tube for the one leaking, replaced it and the other tube sprung a leak!

The second tube required removal of the first tube - when I reinstalled the first tube, I cross-threaded one of the fittings.

I contacted several GOOD hardware supply houses, the super fine thread was not available. I spent about a month on this.

Result - rebuilt rack.

Replacing the tubes are relatively easy - BE CAREFUL!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replaced motor mounts. Now losing power steering fluid, driver side. [200][1993]
posted by  Gaylord  on Sat Sep 27 00:55 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.