Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 87 245 auto - making tail shaft bushing tool/just a thought 200 1987

posted by  Swedish Baklava on  Mon Jan 20 07:06 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi all,

Just a thought, I couldn't help myself but to find a cheap tool and modified it. How about this idea? Thank you as always.


photo tailbushingtoolII_zps02f2be63.jpg

Using a modifed HFT to remove the bushing without taking out the housing.
http://www.harborfreight.com/14-piece-gear-puller-set-30305.html


photo tailbushingtool_zps8e45c435.jpg

The red color indicated area needs to be milled by a milling machine. I have a friend who can do it for me.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New re: 87 245 auto - questions regarding the tail shaft bushing and the center support bearing [200][1987]
posted by  Swedish Baklava  on Tue Jan 14 21:08 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.