Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER Is the M47 drain/fill plug seal the same size as the seal on the oil pan? 200 1991

uid 2796's pic
posted by  bulletproof on  Fri Aug 9 16:49 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:02 CST 2014
[RELATED]

I can tell you the Volvo part number is 11998 (11998-2 but no one lists it that way except maybe Volvo). At least that is what I used for my '89 wagon.

This is a different gasket than the engine oil pan, at least for the 240's I have owned.

In looking around for a description I find one vendor that gives only the inside diameter which is 18.3 mm.

I see others describing this as an engine oil pan plug gasket so I suppose that is true for some models.

Anyway, the complete spec seems to be 18 x 24 x 1.5 mm. Copper, of course.

If you've never removed the drain and fill plugs on your M47, you're in for a real treat.


--
'80 DL 2 door, '89 DL Wagon

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Is the M47 drain/fill plug seal the same size as the seal on the oil pan? [200][1991]
posted by  Epic2112  on Fri Aug 9 15:07 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.