|
Problem fixed but would still like to know about bypassing the bulb failure sensor. Yes I will get a spare.
The problem was a combination of a centre brake bulb that tested good for continuity but didn't work? No corrosion and pretty shiny. The circuit tested OK. New bulb and it's good.
The right hand brakelight works if you push on it because the twistlock for the brakelight connection is worn, the running light works.
The left light was that annoying needed to bend the contacts from the bulb holder AGAIN. The running light worked.
Does anyone have a fix for the worn slots in the taillight assembly where the bulb holder goes in? I'm running out of assemblies.
Thanks for looking.
|