not sure how electrical you are but you can Unplug the Connector from the Circuit board. Then you can lift the top of the connector up (it hinges) Take out one wire at a time and squeeze the contacts closer together to give them more Spring pressure against the circuit board.
You can Hardwire the whole deal: tap into each wire and solder a wire from there to it's cooresponding Light bulb socket.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html http://cleanflametrap.com/tony/
|