Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replaced Intake Manifold gasket: Car runs great now 200 1993

Finished replacing intake manifold gasket. Car runs SO much smoother now. Wasn't too hard of a job since the old gasket was very brittle and came right out. I like the way the holes fit up to the bolts on the new gasket so no worry trying to hold the gasket in place.

The tell-tale that I needed the gasket was this: I sprayed throttle body cleaner around the intake seating surface while the engine was running and the rough idle smoothed out. Car runs great now. Thanks for all the help.

Cabbie








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replaced Intake Manifold gasket: Car runs great now 200 1993

As your Previous Post, You also learned you can leave te Fuel rail attached.

It's Nice when a plan comes together
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html http://cleanflametrap.com/tony/







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.