Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

lost crank bolt 200

I am changing the crankshaft position sensor in my 93 wagon as it was a bit difficult starting and I noticed the sensor was frayed. I had to take the intake manifold off in order to reach it and now after putting in the new sensor I lost the bolt which holds it in. I guess I'll have to go to Volvo to get another one. Any tips for getting it in? I can't get my hands in there.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

lost crank bolt 200

It should be the same as the bolt that holds the AMM to it's mount, take it down to the hardware store and match it up.
Dan








  REPLY TO THIS MESSAGE    PRINT   SAVE 

lost crank bolt 200

The amm bolt is about double the length. Probably the same threads. Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

lost crank bolt 200

It's a start.
Dan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.