Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Alternator brush replacement 200 1992

posted by  berlis on  Fri Oct 12 19:39 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 15:40 CST 2014
[RELATED]

I found worn brushes in alternator. Ordered on line replacement Bosch brush set to do my first ever replacement. Noticed that package not only contains the expected brushes and springs but also two small metal "tubes". Each tube has a "collar" located on the outside about midway along the length of the tube. 1. I'm unfamiliar with this part and not certain how it is assembled with each brush. 2. Secondly, all references say to pull the wire lead through the hole to the appropriate length and bend the lead over to hold this length before the next step of soldering. So, when do I know when I've pulled the lead for enough?

For the fun of Volvos,
Mike
--
'92 245DL, '90 760 GLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Alternator brush replacement [200][1992]
posted by  berlis  on Fri Oct 12 19:39 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.