I just installed some inexpensive Harbor Freight driving lights on the 92 240 and it was easy, the lights mounted in the outside bottom holes where the torx bolts are and I wired them to fog light switch above the headlight switch. Grounded the lights to the relay rail on the drivers side and ran the hot wire to the switch. Power came from tapping the #13 fuse (heated seat fuse I believe) and drilled a small hole through the firewall to run the wire from the switch. Really easy and the cool thing is that the fog light switch lights when turned on and power is cut when the key is turned off. Wiring my son's 93 tomorrow for the lights as well (they are around $15 a pair)