Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drive shaft hardware 200 1991

uid 779's pic
posted by  matt b on  Tue Sep 18 09:31 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 16:33 CST 2014
[RELATED]

Nope... you have to remove the driveshaft.

If you only need to replace the rearmost U-joint (it's generally the first to fail), you can remove only the rear section of driveshaft.. Just make sure you mark the splines and get them back exactly the way they were.

And for the hardware... be sure to use wrenches that are exactly the right size. Those bolts are tight and easy to round off...

--
-Matt I ♥ my ♂






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drive shaft hardware [200][1991]
posted by  Jac912  on Tue Sep 18 08:00 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.