Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Crank Position Sensor bolt 200 1989

posted by  Epic2112 on  Tue Aug 21 08:23 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:15 CST 2014
[RELATED]

There's a piece on the bottom of the engine that bolts to the bottom of the block and the bellhousing, the two bottom bolts on the bellhousing and four bolts into the block. I guess it's a sort of inspection cover. If you remove it you probably won't be able to pull the bolt out through there (but try it), but with a helper and a flexible magnet, you might be able to see the bolt and guide the magnet through the crank sensor hole to the bolt and retrieve it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Crank Position Sensor bolt [200][1989]
posted by  Cnovello  on Tue Aug 21 06:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.