Hello all,

I have been working on disc brakes for my PV544 because of lack of 122 rotors and calipers. I made up the adapter using a 122 spindle.
I will make up a mount for my PV544 later next week.
I found a good combo of parts that uses a rotor from a 2004 vehicle and a 1993 vehicle both of which are readily available.
Had to have the center of the rotor hole opened out to fit the 122 hub. The lug spacing of the rotor was the same as the 122 but the lug holes had to be drilled out to the 122 lug size.
I have a mount made for the 122 which I will take to the machine shop tomorrow to have a pro made mounts machined up.

If intrested check out http://s1153.photobucket.com/albums/p513/rayj5/

You are welcome to email me.

Ray J.