Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Homemade Strut Braces 200 1993

posted by  newmex999 on  Sun Aug 12 18:41 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 21 09:05 CST 2014
[RELATED]

Made some strut braces today out of 3/4 electrical conduit. Cut to length, used sledge to flatten out about 1 1/4" on each end, drilled holes and mounted. Took a little longer then it should have because I primed them, then spray painted them red. All in all, saved about $85 which is what these things cost with shipping. Took her for a spin and it seemed to make some difference when swerving down the road...........
--
1993 240, 1992 240GL, 1985 240DL Wagon, 1983 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 Homemade Strut Braces [200][1993]
posted by  newmex999 subscriber  on Sun Aug 12 18:41 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.