Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2010 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Poly Idler Bushing 120-130

FYI- Coming soon. In prototype stage:

Photobucket








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Poly Idler Bushing 120-130

    I came across this:

    ....these bushings are being made by superpro.

    the list price on these will be $48, we will be doing discounts on these for the first run.

    anyone that is interested in them please contact us thru e-mail. please reference spf3829k








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Poly Idler Bushing 120-130

      I've had good luck with the four sets of Superpro LCA bushing sets I've put in some 240s. Forty eight dollars sounds like a bunch, but pales in comparison to the labor involved in these kinds of upgrades..I'm a gonna fetch me one of them real quick an' stick it in my 130 touring car soon! :)








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    mums the word 120-130

    Innovation is the reason the Chinese steal our intellectual property not the other way around. (I'm talking contemporary history not ancient history). I wouldn't mention this while picking up your take out.








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      mums the word 120-130

      I wouldn't mind the Chinese knock-offs if they only made them to the same specifications as the original. Using cheaper metals, shaving .005 mm off to save more metal, branding wires as 16 instead of a realistic 18 gauge, etc.

      They are hurting themselves like the Japanese did during the 1950's and 1960's. Only when they start using the same products that they now export will they get around to quality control. Too bad, for them and for us.

      As to a good quality steering bushing, hurray!!

      Klaus
      --
      My name is Klaus and I am a V ♂ lv ♂ holic








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Poly Idler Bushing 120-130

    Hallelujah!!

    Just please make sure they fit properly.

    We used to buy only the idler arm bushings from Volvo because the aftermarket brands were crap.

    Then Volvo started selling ScanTech which are horrible and we will not use them.

    We have tried a brand called Karlyn with limited success.

    We now can get a brand called Meyle and so far they appear to be okay.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.