Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

91 940blower resistor pack

My blower is only running on high. FAQ indicates that the resister pack is the ususal culprit, and that it is in the air plenum. Can someone please elaborate on where exactly that is? Is this a major overhaul?
Thanks
JD








  REPLY TO THIS MESSAGE    PRINT   SAVE 

91 940blower resistor pack 200 1991

It may not be the resistor.

http://cleanflametrap.com/fan.html
--
Art Benstein near Baltimore

A man will pay $20 for a $10 item he needs. A woman will pay $10 for a $20 item that she doesn't need.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

91 940blower resistor pack 200 1991

Thanks for the pictorial view, Art. I remember now seeing it on the 88 240 on which I replaced the blower motor, years ago. I guess if I am going in to replace the resistor, i will be replacing the motor while I am in there. Never done a 940 one, though.
You suggest it may not be the resistor; can you suggest what else it may be?
I am heading out on a trip tomorrow for a week, 14 hours driving in freezing temperatures, I guess the blower will be on high the entire trip. Any chance the blower motor will be destroed with no resistor pack? What exactly is the resistor intended to do?
Thanks!
JD








  REPLY TO THIS MESSAGE    PRINT   SAVE 

91 940blower resistor pack 900 1991

Whoops, pulled the trigger too soon. Without the dropdown model/year selection, I made it for you and did it erroneously.

In the 240 case, a blower motor with gummed up bushings will usually turn somewhat on full power (no resistor) but lock up in anything but the high setting, leaving the resistor to do nothing but cook. So, the resistor isn't the cause, but a collateral victim, depending on how long between problem and intervention.

Sorry, I don't have a clue about the 940. Suggest the 7/9 FAQ, if you haven't already been there.
--
Art Benstein near Baltimore

Bakers trade bread recipes on a knead to know basis.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

91 940blower resistor pack 900 1991

No problem Art. Will the high setting continue to work, or will it too stop? Or am I looking at a potential fire if I continue to use it?
JD








  REPLY TO THIS MESSAGE    PRINT   SAVE 

91 940blower resistor pack 900 1991

The blower will not explode or burn up; it will continue to operate, albeit on "high". The resistor pack is easily changed by removing the passenger kickpanel beneath the glovebox. The pack is screwed into the air plenum just inboard of the blower motor. About a fifteen minute replacement.
--
See the 700/900 "FAQ" at the menu bar top screen left side.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

91 940blower resistor pack 900 1991

Thanks Steve, I`ll be doing that when I get home next week.
JD







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.