Does anyone have door armrests for a 444 taking up space in their garage or basement that they'd like to get rid of? My car came with none. I'd give them a good home---on the doors. Thanks

Joe Lazenby, Susquehanna Spares Carlisle/Harrisburg, PA can probably help you.(717) 921-2644 or 249-0565
--
George Downs Bartlesville, Oklahoma

Hello,

Which ones do you need?

I recently discovered that there were 2 different styles for the 444/445.

The early style uses 4 machine screws, 6mm IIRC, for each armrest/door pull to retain them to each door.

The later style uses 2 flat threaded sheet metal type screws.

This later style resembles the ones used on 544 and 122, but the later 444 door pulls have a hard plastic section on the lower half of the handle with an foam filled vinyl cover upper half.

The 544/122 handle is completely covered with foam filled vinyl.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502

That's a good question. I'll check today when I get home from work, but I suspect it's the latter since it's a '58 and was the last year of the 444. There are holes with nuts welded behind them, to the door panels where the armrests are to bolt on to.