Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER engine diffrences 200 1990

posted by  Paul Driver of Inga on  Mon Feb 27 22:00 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

Oh yes they are different. You need a 10 mm socket and a couple of 13mm wrenches to change the belts out on a 1990. For a decent manual get a Bentley, for a fair manual get a Hayes, for emergency bathroom paper get a Chilton.

The bug a boo is the there is a hidden 13mm nut on the back side of the compressor that makes it seem like the compressor will never move. Feel for an oval headed nut on the top back of the compressor and you found it. You just need to loosen the 13mm nuts, do not remove them. Then loosen the 10mm long bolts that tension the belts.

My first time took a couple of hours and a few dirty words. That was before I found out about that hidden nut on the compressor thanks to the BB.

Good luck, and oh, you need a set of matched belts for the water pump and alternator. At least get two belts from the same date code.

Paul

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED engine diffrences [200][1990]
posted by  Pplneedmusic  on Mon Feb 27 21:42 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.