Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need A / C T-fitting 200 1982

posted by  yama on  Sat Sep 10 14:07 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

The suction side of the compressor on a 1990 is 7/8 14, most likely the same on a 1982. I'm not exactly sure what your trying to do but I'm guessing you want to put that fill fitting on the suction side of the compressor. The idea of putting the fill fitting in the middle of the hose is so the charge port is more easily accesable. If you can deal with it on the compressor then why not just get the r12 to r134a charge port adapters. I'd myself would make a new suction hose.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need A / C T-fitting [200][1982]
posted by  nabramson subscriber  on Tue Aug 23 22:17 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.