Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 240 DREADED BLOWER MOTOR 200

posted by  chup on  Thu Apr 14 18:58 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 14:02 CST 2014
[RELATED]

What I did with my present 240 was a short cut. Having done the dreaded blower motor job on another 240 I wanted to try something else if the motor was running. It was running, but screeching like crazy.
I took the console off to reveal the blower motor housing. I drilled a couple of holes in it and used some silicone lube and/or motor oil to lube up the motor best I could. Then I covered the holes with duck tape.
That was a couple of years ago and the motor is always quiet and always runs when turned on.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1993 240 DREADED BLOWER MOTOR [200]
posted by  graymatta  on Thu Apr 14 18:06 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.