Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball Joint / Tie Rod Separator Tool? 700

posted by  rob2volvos on  Mon Mar 7 10:48 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 12 07:52 CST 2014
[RELATED]

Can anyone recommend a decent all-purpose (screw-type) ball joint tie rod separator for the 700/900 series? Where to order from, part number, cost? Not the pickel-fork type -- I could not get that to work without fear of demolishing my front end.
I am half way through a front end upgrade with Moog ball joints / IPD bushings and if it weren't for the fact the I am removing the control arm completely (and having the ball joint removed by the folks replacing the bushings), not sure what I would be doing about getting the old ball joints out.

Thanks,


Rob






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Ball Joint / Tie Rod Separator Tool? [700]
posted by  rob2volvos  on Mon Mar 7 10:48 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.