Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wrecking Yard Valve Shims.. 700 1992

posted by  dinomartino on  Tue Feb 22 16:10 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

Quite a lot of time and effort to pull them in the yard. And the thickness markings are always missing on shims that have been in use for a while, so you don't know what size you're getting without using a micrometer.

Just buy two valve cover gaskets. Check the clearances and figure out what shims you'll need one weekend. Order the shims on Monday, and you should have them by Friday to adjust any that were out of spec the next weekend. They're quite cheap.

I found my 940 was a bit out of adjustment on 3 valves, think I went up 1 shim size on 2 and 2 sizes on the third. Made a BIG difference in how the motor runs.

john
--
1989 245 233K / 1993 945 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Wrecking Yard Valve Shims.. [700][1992]
posted by  289  on Tue Feb 22 13:45 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.