Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Uneven brake pad wear 200 1981

posted by  DougC on  Fri Jan 28 17:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

1981 242:

I'm replacing front brake pads on my 81 242. After I took them out of the calipers, I noticed that they all show the same type of uneven wear. It's not drastic, but definitely is uneven. None of the pistons were stuck. All pushed back easily to make way for the new pads. All four pads look about the same, with the same wear pattern. The one from the inside passenger caliper looks a bit thinner than the other three. Does anyone know what would cause this uneven wear on all four pads?

Second question: I have new PBR/Axxis organic pads. They did not come with shims. Do most of you use shims with these pads or go without the shims??

Here's where I posted two pictures of the uneven pad wear.

http://www.flickr.com/photos/52912258@N08/


--
Thanks for all the help. DougC ::::: 1981 242, IPD bars and Turbo wheels, M46:::::::1984 760, B23FT, M46, waiting to donate engine to 242:::::::1997 S90






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Uneven brake pad wear [200][1981]
posted by  DougC  on Fri Jan 28 17:42 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.