Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to keep Volvo tool from slipping out of Harmonic Balancer?? 700 1992

posted by  raidman on  Sun Jan 9 20:38 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

With my ongoing saga of replacing the head on my daughter's 92 740, I have concluded that the no-start is due to timing issues. When the marks align on the cam, the marks on the crank are not aligned.
The problem is that the harmonic balancer has slots that allow the Volvo Hold-down tool to pop out. Even if I use another pair of slots ( and rotate the HB some), it stills slips out. I used a short piece of 2X4 between the HB and my breaker bar to keep the tool engaged and I was able to remove the HB. But now to torque in the bolt for the HB, I need to have the timing alignment spot on and immobile.
I have read of some filing that is needed to be done to the slots on the HB. Does anyone have an idea of where to file and what type of file to use (I assume a bastard file, of course). Any one have pictures?
Thanks,
el raidman





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 How to keep Volvo tool from slipping out of Harmonic Balancer?? [700][1992]
posted by  raidman  on Sun Jan 9 20:38 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.