Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2021 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fiber washer material 120-130

posted by  greezy on  Mon Oct 25 12:13 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 4 21:21 CST 2011
[RELATED]

Got my heater motor apart, and I want to remake the fiber washer that goes forward of the commutator. It's square with an offset hole in the middle. Mine was baked and bent and...then I busted it in three pieces. Anybody know where to get material for making a fiber washer 1/16" thick?

I posted in another thread here about trying to take the plastic fan off this motor. It was a challenge. I ended up following the suggestion I got here from rogersvolvos to use a center punch. I cut the top and bottom out of a tomato can with a diameter similar to the fan, and used it as a sleeve. Then drove the motor down and out with a center punch. After a soak in PB Blaster.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    fiber washer material 120-130

    posted by  Dinahmoe on  Mon Oct 25 13:07 CST 2010
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat Jun 2 10:33 CST 2012
    [RELATED]

    Old computer parts are loaded with sections that can be cut out. There are backing boards for grinders made of similar material, any body shop supply store should have them on the shelf.








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      fiber washer material 120-130

      posted by  greezy on  Mon Oct 25 16:15 CST 2010
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Sun Sep 4 21:21 CST 2011
      [RELATED]

      Thanks. I glued 2 credit cards together, maybe this will work. Dinahmoe, I am wondering, did you electrolyte your heater core? Looks pretty clean.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.