Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

difficult getting into 1st, 2nd, REV (200) 200

posted by  Volvo From Heck on  Wed Sep 29 04:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

The first place to start would be the reverse lockout plate mounted on the top of the shift housing. Pull the four plastic pins that hold the boot and lift it out of the way. You'll see the lockout--a bridge with two screws--adjust its position as necessary. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New difficult getting into 1st, 2nd, REV (200) [200]
posted by  B0RK ^3 subscriber  on Wed Sep 29 04:33 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.