Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Performance trailing arm bushings? 120-130

Hey guys, just wondering if anyone knew of anything that existed for the late style wagon trailing arms? if so, how much?

otherwise, i'm probably just goign to make aluminum solid ones.

This is for where the axle housing mounts to the trailing arms.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Performance trailing arm bushings? 120-130

RockMon;

Beware...solid alu bushing replacements will transfer a lot more vibrations to the body...you might find this bothersome and unacceptable...I'm sure OE bushings are still available, but if you wanted to make alu replacements, I'd still leave a provision for a 1/4" sheet neoprene for vibe isolation...

...have you gotten the old bolts out yet?...that is another well known galvanic corrosion point on 122s...use Trick 17 as last resort (see: http://www.sw-em.com/Trick%2017.htm )

Cheers








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Performance trailing arm bushings? 120-130

hah, even after trying to use that trick, applying heat, etc. i still couldn't get the bolts out. i ended up putting the old bushing in a press and couldn't press it out.

Canadian winters i'm sure didn't help much.

The reason i ask, is because i'm putting in a ford 8.8 diff, along with some other goodies.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.