Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shifter Madness!! (m46 OD button wiring) 200 1982

posted by  planetman on  Sun Jan 24 16:38 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

To properly install a new shifter harness, you need to remove the chrome handle from the stub.

You then have to remove the upper rubber bushing inside the chrome handle to properly route the harness.

The upper bushing has a groove for the harness, but the groove is only wide enough for the wires and not the connectors so the rubber bushing has to be installed after the new harness is routed through the chrome handle.

It is not uncommon that the upper bushing is deteriorated or you might damage it while removing it.

Volvo still sells the shifter harness and the upper bushing.


--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shifter Madness!! (m46 OD button wiring) [200][1982]
posted by  Jesse B  on Sun Jan 24 09:58 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.