Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame Trap 200

posted by  Jorrell on  Sun Jan 17 13:18 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 27 03:00 CST 2012
[RELATED]

It is located between the third and fourth cylinder intake runner on the intake manifold, I'm assuming you have a car with a B230F engine. Its not hard to change but go ahead and order a new flame trap and flame trap holder as the holder is usually brittle and will break. Also inspect the skinny vacuum line from the flame trap holder to ensure it isn't plugged up, if it is, replacement is highly recommended.

jorrell
--
92 245 250K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame Trap [200]
posted by  92 Volvo  on Sun Jan 17 13:13 CST 2010 >
  • New Flame Trap [200]
    posted by  NewMexico240 subscriber  on Sun Jan 17 16:06 CST 2010 >
  • New Flame Trap [200]
    posted by  1990Volvo240 subscriber  on Mon Jan 18 14:27 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.