Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2008 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Temp Compensation Board 200 1991

I took the speedo out today with the intent to remove the temp compensation board and solder up pins 1 & 3.
Well there isn't one! And no pins.
Is this normal for a 91 245? The gauge works as expected.
Would soldering up the 'pins' still work to eliminate the compensation?

Thanks








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Temp Compensation Board 200 1991

    Do you have a Canadian 240? We must be a little more relaxed up here because Volvo didn't put temperature compensation boards in our 240s.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Temp Compensation Board 200 1991

    My 91 245 has a temp comp board and I did the jumper wire bypass.

    It's been a few years but I recall it looking something like this:

    http://www.brickboard.com/RWD/volvo/1313154/220/240/260/280/temp_comp_board_question.html

    Bert







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.