Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Glove Box Face Attachment 200

posted by  Novasteve74 on  Sun Aug 23 09:05 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 9 11:08 CST 2009
[RELATED]

Hey guys,
I can't seem to find anything in a previous topic like this, so here goes. The glove box face (as in the outside, finished, padded part that attaches to the plastic door) has removed itself. I was able to get the panel off from around the lock bezel. There was a brittle, off-white/ yellowish residue from the previous glue that remained. I was wondering if anyone knew whether this was the original glue, or a previous repair, and if anyone could recommend a new adhesive to use to reattach the face to the door. Thanks in advance for any help.
-Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Glove Box Face Attachment [200]
posted by  Novasteve74  on Sun Aug 23 09:05 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.