Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2024 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A plea for vacuum line help (it used to run!!) 700 1990

uid 34776's pic
posted by  Ryan_R on  Wed May 13 15:12 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 24 13:46 CST 2013
[RELATED]



Turns into a thinner nylon line?

That goes to the MAP (Manifold Air Pressure) sensor on the drivers side strut tower. A thin rectangular sensor inside a metal bracket. There's a nipple on its underside for the vacuum hose. There should be a rubber boot on the other end of that nylon vacuum line to attach it to the MAP sensor.

Here's the Regina manual as a PDF:

http://oak.cats.ohiou.edu/~ridgely/regina/

-Ryan
--

Athens, Ohio
1987 245 DL 314k, Dog-mobile
1990 245 DL 134k M47, E-codes, GT Sway Bars, GT Braces
1991 745 GL 300k, Regina, 23/21mm Turbo Sway Bars





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 A plea for vacuum line help (it used to run!!) [700][1990]
posted by  ctb97  on Wed May 13 14:05 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.