Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to tell the difference between a CAM and ZF power steering rack 200 1986

uid 27's pic
posted by  Art Benstein on  Sat Mar 28 04:24 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Hi Brian,

I don't know why it would make any difference to the seller or buyer what type you are replacing, if the seller includes all the hardware, but the classic identification is at the small end of the rack's tie rod boot. The boot that necks down to the 10mm tie rod is for a CAM rack, and the boot that has an inch-and-a-half rubber grommet at the end is for ZF. Or look at the nameplate under the muck.


--
Art Benstein near Baltimore

Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 How to tell the difference between a CAM and ZF power steering rack [200][1986]
posted by  bouvierman  on Sat Mar 28 04:06 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.