Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

2 ball joints 700

I have been working a 740 for my son. I have noticed one ball joint looks collasped and the other does not. I assume the collapsed one is the bad one but the shake test really doesn't pin it down.

Any other way of checking or should I just replace them both.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

2 ball joints 700

They are cheap and easy to replace: just do them.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2 ball joints 700

I ditto that! I just changed the right side due to a clunk and it seems the left one is going southas well!..FYI The torque values for the two bolts to the strut(hopefully supplied with the new joints ) are 22 ft lbs then tighten another 90 degrees. The single bolt is 44 ft lbs..Good luck








  REPLY TO THIS MESSAGE    PRINT   SAVE 

2 ball joints 700

I figured changing them both would be good measure







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.