Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

glove box door 200 1988

posted by  ZJZ on  Wed Aug 6 07:30 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 14:29 CST 2014
[RELATED]

While you're in there, 'upgrade' the latching area - from an old post -

Go to a hardware store and find a small flat or L-bracket with flush-mount screw holes in it... maybe 1/8" thick. Something similar to this -



Grab a couple of appropriate flush-mount bolts and locknuts. Pull your glovebox out and place the bracket on top, between the original latch-hole and front of the glovebox. Mark the holes, drill them out, install the bracket on the inside of the box with the bolts and locknuts, reinstall the glovebox and enjoy many non-random-glovebox-opening miles to come. Total cost? ~$2.00

Cheers,
Zach Zaletel






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New glove box door [200][1988]
posted by  andrewharte  on Wed Aug 6 07:06 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.