Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Dumb question: Where can I find caliper bolts? 200 1993

uid 34776's pic
posted by  Ryan_R on  Tue Jul 22 05:54 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 24 13:46 CST 2013
[RELATED]


You can reuse them, just clean off all of the old thread-locker on them.

New bolts should be like a dollar or two at a dealership. I just bought four brandy new ones a week or two ago. Steingold or Tasca should have them pretty cheap. How I miss living in Providence...

Otherwise, if you're sourcing these from a hardware store, do remember this very important bit of info: Metric "class 8" is not equivalent to SAE "Grade 8". Metric hardware uses a different set of numbers. You need "Class 10" here in Metric. Stainless steel won't do either.

I wouldn't trust anything less for brakes.

-Ryan
--

Athens, Ohio
1987 245 DL 314k, Dog-mobile
1990 245 DL 134k M47, E-codes, GT Sway Bars
1991 745 GL 300k, Regina, 23/21mm Turbo Sway Bars





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dumb question: Where can I find caliper bolts? [200][1993]
posted by  cgreene  on Tue Jul 22 04:57 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.