Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pressing tie rod end out of steering arm 200 1983

According to "the bible", the tie rod end must be disconnected from the steering arm as an early step in removing the front coil springs and replacing the strut inserts. I don't have the "special press tool (Volvo tool no. 5043)". Any suggestions on a suitable replacement or other appropriate tool?

'83 245 GLT 280K miles, '90 760 GLT 220K mile.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Pressing tie rod end out of steering arm [200][1983]
posted by  berlis  on Wed Jun 25 11:17 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.