Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

temp sensor in rad hose: upper or lower? 200

posted by  someone claiming to be Brickhead on  Sun Mar 23 08:15 CST 2008 [RELATED]

I got a temp sensor adaptor for the water temperature that you splice into the radiator hose. This lets you run an auxilliary guage for the dashboard. My question is should I put the sensor in the lower or the upper radiator hose?

(To my knowledge; the upper hose will reflect temps after the cooling effect of the radiator, and the lower hose will reflect temps that indicate temperatures after it has circulated in the hot engine.)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 temp sensor in rad hose: upper or lower? [200]
posted by  someone claiming to be Brickhead  on Sun Mar 23 08:15 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.