Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

8 Bolt Flywheel - What engines have it?

Shannon and I finally got around to dropping the BW35 from my 67 wagon this evening. Everything went well until we ran into a flywheel dilemma.

What we found was that the existing flying wheel has an 8 bolt pattern. The m41 mated to my b18 that I plan to swap in has a six bolt wheel.

Tomorrow I will start calling salvage yards in hopes of finding an appropriate 8 bolt wheel. As I understand it a flywheel from a B20, B21, B23 or B230 will fit.

Are there any other engines / options we can try?

Tyler








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    8 Bolt Flywheel - What engines have it?

    74-75 B20, OHC engines to 88. Later ones have a different type, stepped instead of flat.








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      8 Bolt Flywheel - What engines have it?

      The B30 flywheels for 74-75 also have 8 bolts and will fit the crank but
      not the engine (They are too big in diameter).
      --
      George Downs, Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.