Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailing arm bushing tool 200

posted by  someone claiming to be teedubb on  Sun May 27 18:19 CST 2007 [RELATED]

I'm looking to replace the trailing arm bushings next month on my 2 240's, '82 & '87. Does anyone have the tool for rent? I live in Hawaii, so postage might be costly, but probably less than renting from IPD, more expeditious than making my own. I can give a deposit if necessary. You can reply also to toddeus5@yahoo.com. Thanks in advance. Advice & suggestions are very welcome, as this is my first go at this challenge.

tw








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Trailing arm bushing tool 200

    posted by  sfraser on  Tue May 29 17:00 CST 2007
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Jul 22 11:14 CST 2011
    [RELATED]

    I don't want to take business away from Duane but I'll give you mine for the postage. I used it once and found that I prefer to burn the old ones out and put in poly. eprn1n2@gmail.com
    --
    1980 240 324k 20 years.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Trailing arm bushing tool 200

    posted by  ODGuru on  Tue May 29 00:31 CST 2007
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat Oct 4 18:52 CST 2014
    [RELATED]

    I have one for rent. Improved over the Factory with some Teflon Washers for less friction and more force transfer and longevity. Includes the drive socket and instructions.

    $40 plus postage both ways.

    Postage* would be between $20 to $30 depending upon time with Insurance.

    Contact me off list for more details.

    Duane








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Trailing arm bushing tool 200

    posted by  volbro245 on  Mon May 28 18:32 CST 2007
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Nov 6 18:05 CST 2013
    [RELATED]

    Make your own. There was a really good write on this site- bolts, pipe etc. We did it and no problems. I took quite a bit of time to do the actual job, but not too difficult. Plan on the better part of an afternoon. If you need more info let me know.

    Mike in Tacoma

    --
    Current: '89 780 Turbo, 1986 245, 1986 740 Turbo RIP: 1983 245 Turbo, 1984 245 Turbo







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.