Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

head gasket replacement 900 1994

posted by  Rule 308 on  Wed Apr 25 12:45 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 09:20 CST 2012
[RELATED]

On the exhaust side just unscrew the nut that holds the EGR pipe tight to the fitting in the back of the exhaust manifold. Spray it with some penetrant if you have some and then give it a good whack with a big beefy screwdriver and it should pop right out of the fitting. With it out of the fitting and the manifold nuts removed from both the side of the head and at the headpipe below, the manifold should just about fall off in your hands.

Mark






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New head gasket replacement [900][1994]
posted by  troubles subscriber  on Wed Apr 25 12:24 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.