Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Urethane Rear Trailing Arm Bushings 200

posted by  David Samuels on  Sun Sep 18 07:41 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:23 CST 2014
[RELATED]

Art Benstein was kind enough to post the pictures for this project at the following addresses:

Safety first: http://cleanflametrap.com/polytab01.jpg;
http://cleanflametrap.com/polytab02.jpg

Muffler dropped: http://cleanflametrap.com/polytab03.jpg

Remove lower shock mount: http://cleanflametrap.com/polytab04.jpg

Center tube heated and removed: http://cleanflametrap.com/polytab05.jpg (and 06)

Die grinder to remove bushing leftovers: http://cleanflametrap.com/polytab07.jpg

It really does make quite a mess: http://cleanflametrap.com/polytab08.jpg

The new bushings and hdwr: http://cleanflametrap.com/polytab09.jpg

The outer bushing with chamfered edge: http://cleanflametrap.com/polytab10.jpg

Lower shock bolt and hdwr to press in the bushings: http://cleanflametrap.com/polytab11.jpg

Outer bushing in place: http://cleanflametrap.com/polytab13.jpg

Inner bushing in place: http://cleanflametrap.com/polytab14.jpg

Hope this information is helpful!

DS





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Urethane Rear Trailing Arm Bushings [200]
posted by  David Samuels subscriber  on Thu Sep 15 14:30 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.