Sort by:

Display by picture type:  [CARS(default)]  [PERSONAL]  [TECHNICAL]  [CLASSAD]  [STANDBYV]


Welcome to the gallery. All exhibits are volunteered by users.

There are 14003 total exhibits.

[ADD A NEW EXHIBIT]

Search criteria: pix_type=CARS. [CLEAR]
Showing 1521 through 1540 of 14003 matching exhibits.
<< <prev 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 next> >>

68 wagon

Volvo 120-130 -- 68 wagon
POSTED BY
chiefeagle[SHOW ALL]
DATE
HTML
CITY
Mount Vernon
STATE
WA
COUNTRY
US

1980 242 In-tank Fuel Pump

Volvo 200 -- 1980 242 In-tank Fuel Pump
POSTED BY
Boxcars[SHOW ALL]
DATE
HTML
CITY
Keystone Heights
STATE
FL
COUNTRY
US
NOTE
No strainer found when taken out. Extra wires added on fastening screw. ??

2 240's Carriage and Motor Works - Kansas City

Volvo 200 -- 2 240's Carriage and Motor Works - Kansas City
POSTED BY
scandia142[SHOW ALL]
DATE
HTML
CITY
Kansas City
STATE
MO
COUNTRY
US

3 240's at Carriage and Motor Works - Kansas City

Volvo 200 -- 3 240's at Carriage and Motor Works - Kansas City
POSTED BY
scandia142[SHOW ALL]
DATE
HTML
CITY
Kansas City
STATE
MO
COUNTRY
US
NOTE
3 240's and yes that's a MB Gullwing back behind them...

My car with front DRL's

Volvo 200 -- My car with front DRL's
POSTED BY
Ken C[SHOW ALL]
DATE
HTML
CITY
Somerset
STATE
NJ
COUNTRY
US
NOTE
All lamps (except the Volvo/Cibie euroheadlights) are LED powered -- this includes not only the Hellas below and the grille lamps, but also the parking and turn signal lights, per my old article in Rolling.

my '66 122 "Helga"

Volvo  -- my '66 122 "Helga
POSTED BY
volvolvr66[SHOW ALL]
DATE
HTML
CITY
Morgantown
STATE
WV
COUNTRY
US

1961 122S

Volvo 120-130 -- 1961 122S
POSTED BY
ausGT[SHOW ALL]
DATE
HTML
CITY
Sydney
COUNTRY
AU

1961 122S

Volvo 120-130 -- 1961 122S
POSTED BY
ausGT[SHOW ALL]
DATE
HTML
CITY
Sydney
COUNTRY
AU
NOTE
1961 122S with worked B16 motor, 45mm weber, koni shocks

1961 122S

Volvo 120-130 -- 1961 122S
POSTED BY
ausGT[SHOW ALL]
DATE
HTML
CITY
Sydney
COUNTRY
AU
NOTE
1961 122S with worked 1600 motor, 45mm weber, koni shocks

A/C Pulley & Crank Pulley Mis-allignment

Volvo 200 -- A/C Pulley & Crank Pulley Mis-allignment
POSTED BY
Boxcars[SHOW ALL]
DATE
HTML
CITY
Keystone Heights
STATE
FL
COUNTRY
US

1968 220

Volvo  -- 1968 220
POSTED BY
Thom[SHOW ALL]
DATE
HTML
STATE
CT
COUNTRY
US
NOTE
Not the best photo, but still not bad.

Ford Mustang 5.0 H.O. Conversion

Volvo 200 -- Ford Mustang 5.0 H.O. Conversion
POSTED BY
jalopy[SHOW ALL]
DATE
HTML
CITY
BURNABY
STATE
BR
COUNTRY
CA

Ford Mustang 5.0 H.O. Conversion

Volvo 200 -- Ford Mustang 5.0 H.O. Conversion
POSTED BY
jalopy[SHOW ALL]
DATE
HTML
CITY
BURNABY
STATE
BR
COUNTRY
CA

Ford Mustang 5.0 H.O. Conversion

Volvo 200 -- Ford Mustang 5.0 H.O. Conversion
POSTED BY
jalopy[SHOW ALL]
DATE
HTML
CITY
BURNABY
STATE
BR
COUNTRY
CA

Ford Mustang 5.0 H.O. Conversion

Volvo 200 -- Ford Mustang 5.0 H.O. Conversion
POSTED BY
jalopy[SHOW ALL]
DATE
HTML
CITY
BURNABY
STATE
BR
COUNTRY
CA
NOTE
What started out in 1995 as an involved project was finally completed this year. It did not help matters when the car sat for 10 years - that ended up with the replacement of the starter ( West coast moisture ), fuel tank ( same problem ), radiator and the heater core. One positive note is that even though the custom made three row rad ended up deteriorating from corrosion a much better aluminum one replaced it. The same situation occurred with the heater core, left too long without any antifreeze. The 5.0 L itself and the AOD transmission came from a red 1993 Mustang fastback back in 1995 which had approx. 10,000 km ( 6,000 mi. ) at the time before being put side ways into a pole. That's one way to get a low mileage engine. Interior is black leather from a 1982 245, along with the dash, and a tailgate from a 1992 model. Also put a set of 1983-85 U.S. bumpers on and the late style windshield. The hood is from a 1980 242 DL. as is the grill, cut down to fit between the new Euro headlights. Mirrors were from the '86 and newer 240's. Also put a pair of IPD sway bars on, as well as braided brake hoses and poly torque rod bushings. The suspension, brakes ( drilled rotors )etc. were rebuilt so basically the car should be good for a few years yet. Oh, and it was brought up from California so the body had very little in the way of rust.

240 under carriage

Volvo 200 -- 240 under carriage
POSTED BY
Birdfarmer[SHOW ALL]
DATE
HTML
CITY
Gadsden
STATE
TN
COUNTRY
US

Valves 1 & 2 at TDC

Volvo 200 -- Valves 1 & 2 at TDC
POSTED BY
Koos[SHOW ALL]
DATE
HTML
CITY
Louisville
STATE
KY
COUNTRY
US
NOTE
What Valves 1 & 2 (on cylinder 1) look like at TDC when doing the rope trick for a timing belt job. Taken through the oil fill cap, #1 is closest to front of engine.

Alternative Water Pump Lift

Volvo 200 -- Alternative Water Pump Lift
POSTED BY
Koos[SHOW ALL]
DATE
HTML
CITY
Louisville
STATE
KY
COUNTRY
US
NOTE
Here's an easy way to get the mushroom seal on the top of the water pump good and snug- tighten up the come a long and you can fuss with the bolts with both hands!

71 142E ITB Race car

Volvo  -- 71 142E ITB Race car
POSTED BY
Gary L[SHOW ALL]
DATE
HTML
CITY
Dexter
STATE
KS
COUNTRY
US

122 and duett

Volvo 120-130 -- 122 and duett
POSTED BY
chiefeagle[SHOW ALL]
DATE
HTML
CITY
Mount Vernon
STATE
WA
COUNTRY
US
Search criteria: pix_type=CARS. [CLEAR]
Showing 1521 through 1540 of 14003 matching exhibits.
<< <prev 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 next> >>


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.