B2 = Cruise control (Also pin 13 in OBDII connector 96>)
Note, cruise control codes are reset (except 1-2-2) when you turn off the ignition. You will never clear code 1-2-2.
Code 1-2-2 = Vehicle speed has not exceeded 22mph for 15 seconds or no speed signal.
So to see which of the possibilities it is you need to run the car above 22 mph for more than 15 seconds and read the codes without switching off the ignition.
The cruise control ECU is in the panel for relays under dash drivers side.
The usual cause of failure is that the brake pedal switch has come loose from it's mounting.
|