The flashing two lights are the automatic climate control. The information on how to get the fault is in the Haynes manual, if you don't have one, I'll paraphrase....
1. Ignition switch OFF, on the diagnostic module behind the left headlight, put the test jumper in B1.
2. Turn ignition on, but don't start car.
3. Get ready to write the code down, and press the test button for about 1 second. The LED will blink a 3 digit code.
4. Press the button again to get the next fault code, and again until the first code is repeated.
5. I'd try to clear it, you never know, hold the button down for 5 seconds and release, after three second the led will light, hold the button down for 5 seconds again.

If you post the fault codes here, someone will let you know what they indicate.

Good Luck, Chuck.