|
The relay panel is above the left side panel, on the inside of the firewall.
I don't know the exact location of the low beams relay, but you can try pulling one by one out. the light blue IS NOT the one, and yellow IS NOT.
***A relay is nothing else but a powered switch that has "heavy-duty" terminals which don't melt from high current flow. A relay would not increase current, only decrease it if the contacts are no good. I think the fuses woulg blow uot first if the current was too high. LOOK AGAIN AT THE BULBS.
aLSO, YOU CAN TRY TO CHECK VOLTAGE AND AMPERAGE AT THE SOCKETS IF YOU HAVE A GOOD QUALITY METER.
This "little problem" may need a professional help...
Sorry, can't help....
|