Volvo AWD C70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2002 C70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Temp sensor & plastic shield behind air dam C70

posted by  Paul L on  Fri Sep 13 14:14 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My temperature sensor came loose/broke off from the plastic shield next to the lower air dam. How should it be reconnected?
Pointing into the housing, from the passenger side towards the drivers side? (With the clip on the outside, and the wire on the inside?)

Also, the whole shield/housing is quite loose: seems to only be screwed in on the far left and right sides. It rattles/shakes forward and backward pretty easily. Should it snap in somewhere or are some screws missing?

Thanks!
--
'99 Nautic Blue C70 HPT Coupe, Loaded, Full Soft Leather, Dolby, STC, ipd ECU, Bilsteins






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temp sensor & plastic shield behind air dam [C70]
posted by  Paul L  on Fri Sep 13 14:14 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.