Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine not warming up! 850 1995

posted by  Gerald C on  Thu Jan 17 03:16 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

You need a thin Torx-40 tool (or bit) at least 6" long. I tried using a short Torx-40 *bit* on a 3/8" rachet tool with an extension rod, and the combination was too thick to maneuver and align. (These short bits are commonly found in kits.) I ended up buying a dedicated T-handle Torx-40 tool pretty cheap (see here for one possible source: http://www.wihatools.com/364serie.htm). Your engine compartment may be a little different so definitely try using whatever tools you may currently have first.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine not warming up! [850][1995]
posted by  Mr. Detail  on Wed Jan 16 01:54 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.