|
Larry,
Well, it seems like alot happened all at once. The flashing arrow is on indicating a transmission fault code was stored as you found out with A1 2-3-2.
The check engine lamp came on because a fault code was stored indicating your emissions are not to spec as you found out with A2 4-3-5. Is your speedometer
working now? If not, any number of sensors beign sent or received form the
TCM module could be at fault. The TCM uses the RPM sensor to determine
vehicle speed. If the TCM registers an excessive deviation in the vehicle
speed signal from the combined instrument compared to the TCM calculated speed,
then 2-3-2 is set. As far as the oxygen sensor goes, replace it. I don't have a clue what happened about the lamps failing then coming back on...
|