Humberto,
Thanks for the advice!
So after pulling the intake, I was able to look into the bottom tube that goes into the oil pan and determined that it was not plugged after all.
I put a new PCV system on the car and called it done.
I also pressed in a new seal and the car is no longer having an issue starting after warming up. I believe this to be a huge crisis adverted.
The lesson learned here is that I should have replaced both rear CAM seals when I replaced the CAM sensor seal a couple of years ago and I did not. Literally a ticking time bomb.
Chalk this up as don't do that again.
Later,
Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245
|